Main Menu x

Need help choosing the best mount for your species?

Below in alphabetical order is a comprehensive list of species, including suggestions, hanging tips, and options for displaying your skull. Click on the species header to view Skull Hooker products that support your mounting needs.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

A

Alligator

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree

American Deer Species

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree, Bone Bracket, Skull Cap
Suggestion: For smaller bucks the Mini Hooker (2.5 inches from the wall) is an option. Some prefer a closer to the wall presentation than that of the Little Hooker, which protrudes 5 inches from the wall.
Note: The Mini Hooker will have less side to side(left/right) versatility or display options and not designed for larger bucks that need additional clearance from the wall.

American Elk Species

Products: Big Hooker, XXL Bone Bracket
Option: The 4.5” Big Hooker Short Arm (sold separately) is a display option for much smaller bulls/raghorns that do not require the 9” of wall clearance the Standard Big Hooker arm.

B

Baboon

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree

Bighorn Sheep

Products: Little Hooker, Big Hooker, Table Hooker, Trophy Tree, XXL Bone Bracket
Note: The Little Hooker is the preferred mounting option, however two possible issues may arise when mounting  Big Horn rams. The Little Hooker affords about 5 inches of wall clearance and some rams sweep back creating a wall clearance issue. One solution is to mount a wood plaque behind the wall plate to provide that extra clearance needed, or utilize the Big Hooker. Also, the standard Little Hooker prong may be too narrow to fit properly. We offer a sheep prong (sold separately) that is slightly wider to accommodate most skulls. When placing an order through our web store, note that you need the sheep prong and we can include it at no extra charge with the initial order.
Tip: For Table Hooker use, it is always recommended (because of the ram’s side to side weight) to secure/screw(hardware included) the base down to a surface to prevent the Table Hooker from being knocked over.

Bison

Products: Big HookerTrophy TreeXXL Bone Bracket
Suggestion: The 4.5 inch Big Hooker Short Arm (sold separately) is a preferred display option for species that do not require the 9” of wall clearance of the Standard Big Hooker Arm.

Black Bear

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree

Blacktail Deer

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree, Bone Bracket, Skull Cap
Suggestion: For smaller bucks the Mini Hooker (2.5 inches from the wall) is an option. Some prefer a closer to the wall presentation than that of the Little Hooker, which protrudes 5 inches from the wall.
Note: The mini Hooker will have less side to side(left/right) versatility or display options and not designed for larger bucks that need clearance from the wall.

Blesbok/Bontebok

Products: Little Hooker, Table Hooker, Trophy Tree

Bongo

Products: Little Hooker, Table Hooker, Trophy Tree, Bone Bracket, Skull Cap

Brown Bear

Products: Big Hooker, Trophy Tree
Option: The 4.5 inch Big Hooker Short Arm (sold separately) is a preferred display option for species that do not require the 9” of wall clearance of the Standard Big Hooker Arm.
Tip: To display the lower jaw, simply apply a small amount of bondo/super glue to both pivot joints. For a slightly open mouth look, place a pen (or similar for spacing) in between the upper and lower teeth when drying.

Bushbuck

Products: Little HookerTable Hooker, Trophy Tree, Bone Bracket, Skull Cap

Bushpig

Products: Little Hooker, Table Hooker, Trophy Tree, Bone Bracket, Skull Cap

C

Cape Buffalo

Products: Big HookerTrophy Tree, XXL Bone Bracket
Suggestion: The Big Hooker Short Arm (sold separately) is a preferred display option for species does not require the 9” of wall clearance the Standard Big Hooker arm.

Caribou

Products: Big HookerTrophy Tree, XXL Bone Bracket

Cheetah

Products: Little HookerTable Hooker, Mini Hooker, Trophy Tree
Suggestion: The preferred bracket for mounting all predator animals is the Mini Hooker (2.5 inches from the wall). These species do not require additional wall clearance and so some prefer a closer to the wall display than that of the Little Hooker, which protrudes 5 inches from the wall.
Tip: To display the lower jaw, simply apply a small amount of bondo/super glue to both pivot joints. For a slightly open mouth look, place a pen (or similar for spacing) in between the upper and lower teeth when drying.

Coues Deer

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree, Bone Bracket, Skull Cap
Note: The mini Hooker will have less side to side(left/right) versatility or display options. The Mini Hooker is not designed for larger deer that need the additional wall clearance.

Crocodile

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree

Products: Little Hooker, Big Hooker, Table Hooker, Mini Hooker, Trophy Tree, Bone Bracket, Skull Cap, XXL Bone Bracket

D

Domestic Sheep & Goats

Products: Little HookerTable Hooker, Trophy Tree, XXL Bone Bracket

Duiker – Grey

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree
Note: The preferred bracket for mounting all smaller skulled and antlered/horned animals is the Mini Hooker (2.5 inches from the wall). Some prefer a closer to the wall presentation than that of the Little Hooker, which protrudes 5 inches from the wall.
Tip: For this species you may try mounting the prong upside down for a better fit of the prong into the skull.

G

Gazelle – Grants

Products: Little Hooker, Table Hooker, Trophy Tree, Bone Bracket, Skull Cap

Gazelle – Thompsons

Products: Little Hooker, Table Hooker, Trophy Tree, Bone Bracket, Skull Cap

Gemsbok/Oryx

Products: Little Hooker, Table Hooker, Trophy Tree
Note: The Big Hooker is the preferred bracket for this species. However, some have had success with the Little Hooker.

Giraffe

Products: Big Hooker, Trophy Tree, XXL Bone Bracket

Grizzly Bear

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree
Note: The preferred bracket for this species is the Mini Hooker/prong. However, for Larger skulled Grizzlies, the Big Hooker may be necessary. If selecting the Big Hooker, the 4.5 inch Big Hooker Short Arm (sold separately) is a preferred display option for species that do not require the 9” of wall clearance of the Standard Big Hooker Arm.
Tip: To display the lower jaw, simply apply a small amount of bondo/super glue to both pivot joints. For a slightly open mouth look, place a pen (or similar for spacing) in between the upper and lower teeth when drying.

Grysbok

Products: Little Hooker, Table Hooker, Trophy Tree
Tip: For this species you may try mounting the prong upside down for a better fit of the prong into the skull.

H

Hartebeest

Products: Big Hooker, Trophy Tree, XXL Bone Bracket

Hyena

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree
Suggestion: The preferred bracket for mounting all predator animals is the Mini Hooker (2.5 inches from the wall). These species do not require additional wall clearance and so some prefer a closer to the wall display than that of the Little Hooker, which protrudes 5 inches from the wall.
Tip: To display the lower jaw, simply apply a small amount of bondo/super glue to both pivot joints. For a slightly open mouth look, place a pen (or similar for spacing) in between the upper and lower teeth when drying.

J

Jackal

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree
Suggestion: The preferred bracket for mounting all predator animals is the Mini Hooker (2.5 inches from the wall). These species do not require additional wall clearance and so some prefer a closer to the wall display than that of the Little Hooker, which protrudes 5 inches from the wall.
Tip: For this species you may try mounting the prong upside down for a better fit of the prong into the skull.
Tip: To display the lower jaw, simply apply a small amount of bondo/super glue to both pivot joints. For a slightly open mouth look, place a pen (or similar for spacing) in between the upper and lower teeth when drying.

K

Klipspringer

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree
Tip: For this species you may try mounting the prong upside down for a better fit of the prong into the skull.

Kudu

Products: Big Hooker, Trophy Tree, XXL Bone Bracket

L

Lechwe

Products: Little Hooker, Table Hooker, Trophy Tree

Leopard

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree
Suggestion: The preferred bracket for mounting all predator animals is the Mini Hooker (2.5 inches from the wall). These species do not require additional wall clearance and so some prefer a closer to the wall display than that of the Little Hooker, which protrudes 5 inches from the wall.
Tip: To display the lower jaw, simply apply a small amount of bondo/super glue to both pivot joints. For a slightly open mouth look, place a pen (or similar for spacing) in between the upper and lower teeth when drying.

Lion

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree
Suggestion: The preferred bracket for mounting all predator animals is the Mini Hooker (2.5 inches from the wall). These species do not require additional wall clearance and so some prefer a closer to the wall display than that of the Little Hooker, which protrudes 5 inches from the wall.
Note: For larger male Lion skull, the Big Hooker may be necessary.
Tip: To display the lower jaw, simply apply a small amount of bondo/super glue to both pivot joints. For a slightly open mouth look, place a pen (or similar for spacing) in between the upper and lower teeth when drying.

Lioness

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree
Suggestion: The preferred bracket for mounting all predator animals is the Mini Hooker (2.5 inches from the wall). These species do not require additional wall clearance and so some prefer a closer to the wall display than that of the Little Hooker, which protrudes 5 inches from the wall.
Tip: To display the lower jaw, simply apply a small amount of bondo/super glue to both pivot joints. For a slightly open mouth look, place a pen (or similar for spacing) in between the upper and lower teeth when drying.

Longhorn

Products: Big Hooker, Trophy Tree, XXL Bone Bracket

Lynx/Caracal

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree
Suggestion: The preferred bracket for mounting all predator animals is the Mini Hooker (2.5 inches from the wall). These species do not require additional wall clearance and so some prefer a closer to the wall display than that of the Little Hooker, which protrudes 5 inches from the wall.
Tip: For this species you may try mounting the prong upside down for a better fit of the prong into the skull.
Tip: To display the lower jaw, simply apply a small amount of bondo/super glue to both pivot joints. For a slightly open mouth look, place a pen (or similar for spacing) in between the upper and lower teeth when drying.

M

Moose

Products: Big Hooker, Trophy Tree, XXL Bone Bracket

Mountain Goat

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree
Suggestion: The preferred bracket for mounting all smaller skulled and antlered/horned animals is the Mini Hooker (2.5 inches from the wall). Some prefer a closer to the wall presentation than that of the Little Hooker, which protrudes 5 inches from the wall.

Mountain Lion

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree
Suggestion: The preferred bracket for mounting all predator animals is the Mini Hooker (2.5 inches from the wall). These species do not require additional wall clearance and so some prefer a closer to the wall display than that of the Little Hooker, which protrudes 5 inches from the wall.
Tip: To display the lower jaw, simply apply a small amount of bondo/super glue to both pivot joints. For a slightly open mouth look, place a pen (or similar for spacing) in between the upper and lower teeth when drying.

Mule Deer

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree, Bone Bracket, Skull Cap
Suggestion: For much smaller bucks the Mini Hooker (2.5 inches from the wall) is an option. Some prefer a closer to the wall presentation than that of the Little Hooker, which protrudes 5 inches from the wall.
Note: The Mini Hooker will have less side to side(left/right) versatility or display options and not designed for larger bucks that need additional clearance from the wall.

Musk Ox

Products: Big Hooker, Trophy Tree, XXL Bone Bracket

P

Pronghorn

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree, Bone Bracket, Skull Cap
Suggestion: The preferred bracket for mounting all smaller skulled and antlered/horned animals is the Mini Hooker (2.5 inches from the wall). Some prefer a closer to the wall presentation than that of the Little Hooker, which protrudes 5 inches from the wall.

R

Red Stag

Products: Big Hooker, Trophy Tree, XXL Bone Bracket

Reedbuck – Common

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree
Suggestion: The preferred bracket for mounting all smaller skulled and antlered/horned animals is the Mini Hooker (2.5 inches from the wall). Some prefer a closer to the wall presentation than that of the Little Hooker, which protrudes 5 inches from the wall.

Reedbuck – Mountain

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree
Suggestion: The preferred bracket for mounting all smaller skulled and antlered/horned animals is the Mini Hooker (2.5 inches from the wall). Some prefer a closer to the wall presentation than that of the Little Hooker, which protrudes 5 inches from the wall.

Rhebuck

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree, Bone Bracket, Skull Cap
Suggestion: The preferred bracket for mounting all smaller skulled and antlered/horned animals is the Mini Hooker (2.5 inches from the wall). Some prefer a closer to the wall presentation than that of the Little Hooker, which protrudes 5 inches from the wall.

Rocky Mountain Elk

Products: Big Hooker, Trophy Tree, XXL Bone Bracket
Option: The 4.5” Big Hooker Short Arm (sold separately) is a display option for much smaller bulls/raghorns that do not require the 9” of wall clearance the Standard Big Hooker arm.

Roe Buck

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree, Bone Bracket, Skull Cap
Suggestion: The preferred bracket for mounting all smaller skulled and antlered/horned animals is the Mini Hooker (2.5 inches from the wall). Some prefer a closer to the wall presentation than that of the Little Hooker, which protrudes 5 inches from the wall.

Roosevelt Elk

Products: Big Hooker, Trophy Tree, XXL Bone Bracket
Option: The 4.5” Big Hooker Short Arm (sold separately) is a display option for much smaller bulls/raghorns that do not require the 9” of wall clearance the Standard Big Hooker arm.

S

Sable/Roan

Products: Little Hooker, Table Hooker, Trophy Tree
Note: Because of how far this species’ horns sweeps  back, the Trophy Tree with the large prong (sold separately) is the only Skull Hooker product that will work.

Serval

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree
Suggestion: The preferred bracket for mounting all predator animals is the Mini Hooker (2.5 inches from the wall). These species do not require additional wall clearance and so some prefer a closer to the wall display than that of the Little Hooker, which protrudes 5 inches from the wall.
Tip: For this species you may try mounting the prong upside down for a better fit of the prong into the skull.

Sitatunga

Products: Little Hooker, Table Hooker, Trophy Tree

Smaller Bucks

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree, Bone Bracket, Skull Cap
Suggestion: The preferred bracket for mounting all smaller skulled and antlered/horned bucks is the Mini Hooker (2.5 inches from the wall). Some prefer a closer to the wall presentation than that of the Little Hooker, which protrudes 5 inches from the wall.

Springbuck

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree, Bone Bracket, Skull Cap
Suggestion: The preferred bracket for mounting all smaller skulled and antlered/horned animals is the Mini Hooker (2.5 inches from the wall). Some prefer a closer to the wall presentation than that of the Little Hooker, which protrudes 5 inches from the wall.

Steenbuck

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree, Bone Bracket, Skull Cap
Suggestion: The preferred bracket for mounting all smaller skulled and antlered/horned animals is the Mini Hooker (2.5 inches from the wall). Some prefer a closer to the wall presentation than that of the Little Hooker, which protrudes 5 inches from the wall.

Suni

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree
Suggestion: The preferred bracket for mounting all smaller skulled and antlered/horned animals is the Mini Hooker (2.5 inches from the wall). Some prefer a closer to the wall presentation than that of the Little Hooker, which protrudes 5 inches from the wall.
Tip: For this species you may try mounting the prong upside down for a better fit of the prong into the skull.

T

Tule Elk

Products: Big Hooker, Trophy Tree, XXL Bone Bracket
Option: The 4.5” Big Hooker Short Arm (sold separately) is an option for much smaller bulls/raghorns that do not require the 9” of wall clearance the Standard Big Hooker arm.

Turkey

Products: Turkey HookerTrophy Tree

Suggestion: The Turkey Hooker is the preferred product for displaying Turkey fans on the wall.
Tip: The Turkey Hooker can also be used stand alone on an office desk or shelf.
Option: The Turkey Hooker is compatible with the Trophy Tree and Table Hooker (both sold separately)

W

Warthog

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree
Tip: For this species you may try mounting the prong upside down for a better fit of the prong into the skull.
Tip: To display the lower jaw, simply apply a small amount of bondo/super glue to both pivot joints. For a slightly open mouth look, place a pen (or similar for spacing) in between the upper and lower teeth when drying.

Waterbuck

Products: Little Hooker, Table Hooker, Trophy Tree, XXL Bone Bracket

Whitetail

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree, Bone Bracket, Skull Cap

Wild Boar

Products: Little Hooker, Table Hooker, Mini Hooker, Trophy Tree
Tip: For this species you may try mounting the prong upside down for a better fit of the prong into the skull.
Tip: To display the lower jaw, simply apply a small amount of bondo/super glue to both pivot joints. For a slightly open mouth look, place a pen (or similar for spacing) in between the upper and lower teeth when drying.

Wildebeest/GNU

Products: Big Hooker, Trophy Tree, XXL Bone Bracket
Suggestion: The 4.5 inch Big Hooker Short Arm (sold separately) is a preferred display option for species that do not require the 9” of wall clearance of the Standard Big Hooker Arm.

Z

Zebra

Products: Big Hooker, Trophy Tree
Suggestion: The 4.5 inch Big Hooker Short Arm (sold separately) is a preferred display option for species that do not require the 9” of wall clearance of the Standard Big Hooker Arm.
Tip: To display the lower jaw, simply apply a small amount of bondo/super glue to both pivot joints. For a slightly open mouth look, place a pen (or similar for spacing) in between the upper and lower teeth when drying.

X